Separation of Boron and Arsenic from Geothermal Water with Novel Gel-Type Chelating Ion Exchange Resins: Batch and Column Sorption-Elution Studies.

In this research, the removal of boron and arsenic from geothermal water was examined by using novel N-methyl-d-glucamine functionalized gel-like resins (abbreviated as 1JW and 2JW) synthesized by the membrane emulsification method. The outcomes were compared with those of commercially available boron selective chelating ion exchange resin (Diaion CRB 05). According to the results obtained with the novel resins, it was possible to reduce both boron and arsenic concentrations in geothermal water by using these novel gel-like chelating resins below their permissible levels for agricultural irrigation (<1 mg B/L) and drinking water (<0.01 mg As/L) by using the batch method. The optimum resin concentration required for almost complete boron removal (more than 95%) with the two chelating resins was determined to be 2 g/L. The novel gel-like chelating resins 1JW and 2JW achieved 94% of arsenic removal by using the resin concentration of 8 g/L, while the required resin concentration was 32 g/L for 94% of arsenic removal using commercially available Diaion CRB05 resin. In addition, the column performance characteristics of the novel chelating resins for the separation of boron were studied, and the results were compared to those obtained with Diaion CRB05. According to the column data obtained, the total resin capacities of the Diaion CRB05, 1JW, and 2JW resins were calculated as 6.29, 5.08, and 4.64 mg B/mL-resin, respectively.

Synthesis, characterization, and DFT study of novel metallo phtalocyanines with four carboranyl clusters as photosensitisers for the photodynamic therapy of breast cancer cells.

The synthesis and characterization of novel Zn(II) and Co(II) phthalocyanines 4 and 5, respectively containing four o-carboranyl units (40 boron atoms, 32.5% boron by weight) at the peripheral positions are described. The phthalocyanines (Pcs) were synthesized by cyclotetramerization of the previously prepared precursor 4­(2­thiol­o­carboranyl)thiolato­phthalonitrile 3 with the presence of metal salt in boiling dry DMF under a dry nitrogen atmosphere. They were characterized by elemental analysis, UV-Vis, FT-IR, MALDI-TOF mass and 1H NMR spectrometry. To elucidate the structural, spectroscopic and bonding properties of the obtained compounds, calculations with DFT/TD-DFT(Density Functional Theory/Time Dependent-Density Functional Theory) were performed. The cytotoxic effects of 4 and 5 on cancer cells and epithelial cells were determined. The targeted cytotoxicities of both compounds against cancer cells were analyzed with the cell viability test. Although, 4 caused less PDT (Photodynamic therapy) based decrease in cell viability of cancer cell line in comparison to 5, it showed comparatively high cytotoxicity against cancer cells but not epithelial cells. The IC50 (half maximal inhibitory concentration) values indicate that 4 with PDT shows 17.3 fold more cytotoxicity to breast cancer cells than epithelial cells. The selectivity in cytotoxicity of 4 makes it a good candidate for cancer treatment. Interestingly, 5 was found to be highly cytotoxic for both cancer and epithelial cell lines. Considerably, 5 might be used as a cancer drug when combined with targeting agents such as antibodies and aptamers.

Utilization of reverse osmosis (RO) for reuse of MBR-treated wastewater in irrigation-preliminary tests and quality analysis of product water.

Membrane bioreactor (MBR) effluent collected from a wastewater treatment plant installed at an industrial zone was used for reverse osmosis (RO) membrane tests in the laboratory. For this, two different GE Osmonics RO membranes (AK-BWRO and AD-SWRO) were employed. The results showed that AK-brackish water reverse osmosis (AK-BWRO) and AD-seawater reverse osmosis (AD-SWRO) membranes have almost similar rejection performances regarding analyzed parameters such as conductivity, salinity, color, chemical oxygen demand (COD), and total organic carbon (TOC). On the other hand, these membranes behaved quite differently considering their permeate water flux at the same applied pressure of 10 bar. AD-SWRO membrane was also tested at 20 bar. The results revealed that AD-SWRO membrane had almost the same rejections either at 10 or at 20 bar of applied pressure. Compared with irrigation water standards, AK-BWRO and AD-SWRO gave an effluent with low salinity value and sodium adsorption ratio (SAR) which makes it unsuitable for irrigation due to the infiltration problems risi0ng from unbalanced values of salinity and SAR. Combination of MBR effluent and RO effluent at respective proportions of 0.3:0.7 and 0.4:0.6 for AK-BWRO and AD-SWRO, respectively, are the optimum mixing ratios to overcome the infiltration hazard problem. Choice of less-sensitive crops to chloride and sodium ions is another strategy to overcome all hazards which may arise from above suggested mixing proportions.

Biocompatibility and biomechanical characteristics of loofah based scaffolds combined with hydroxyapatite, cellulose, poly-l-lactic acid with chondrocyte-like cells.

The current study reports the biocompatibility and biomechanical characteristics of loofah-based scaffolds combined with hydroxyapatite (HA), cellulose, poly-l-lactic acid (PLLA) with chondrocytes-like cells. Scanning electron microscope (SEM) micrographs of the scaffolds showed that the addition of PLLA usually resulted in an increase in cell's attachment on scaffolds. Mechanical and elemental analyzes were assessed using tensile test and Energy Dispersive X-ray spectrometry (EDS), respectively. In summary, we showed that the loofah+PLLA+HA scaffolds perform significantly better than other loofah-based scaffolds employed in terms of increasing a diversity of mechanical properties including tensile strength and Young's modulus. Based on the analysis of the differential scanning calorimetry (DSC) thermograms and EDS spectrums that give an idea about the calcium phosphate (CaP) ratios, the improvement in the mechanical properties could principally be recognized to the strong interaction formed between loofah, PLLA and HA. The viability of chondrocytes on loofah-based scaffolds was analyzed by XTT tests. However, none of the scaffolds have proved to be toxic in metabolic activity. The histological evaluation obtained by hematoxylin and eosin (H&E), Masson trichrome, toluidine blue and immunohistochemistry methods showed that cells in all scaffolds produced extracellular matrix that defined proteoglycan and type I-II collagens. The results of this study suggest that the loofah-based scaffold with desirable properties can be considered as an ideal candidate for cartilage tissue engineering applications.

Biocompatibility of MG-63 cells on collagen, poly-L-lactic acid, hydroxyapatite scaffolds with different parameters.

PURPOSE: In this study, osteoblast-like MG-63 cells were cultured on 3 different scaffold types composed of (a) collagen + poly-L-lactic acid (PLLA), (b) collagen + hydroxyapatite (HA; 30ºC) or (c) collagen + hydroxyapatite (HA; 37ºC) and produced with different porosities. METHODS: Biomechanical properties of the scaffolds were characterized by tensile strength measurements. Properties of the cell-seeded scaffolds were evaluated with scanning electron microscopy (SEM). Cell adhesion and proliferation capacities were evaluated. Alkaline phosphatase (ALP) levels in media were measured. Transmission electron microscopy (TEM) and histological analyses were used to assess morphological characteristics. RESULTS: Our results showed that collagen-based PLLA and HA scaffolds have good cell biocompatibility. MTT test showed that the scaffolds exhibited no cytotoxicity. According to the force and displacement data, collagen + HA at 37ºC showed the highest mechanical strength and displacement. CONCLUSION: The results suggest that collagen-based PLLA and HA scaffolds might improve osteoblastic growth in vitro and have biomaterial integration potential in possible therapeutic approaches for future clinical studies.

Removal of bisphenol A (BPA) from water by various nanofiltration (NF) and reverse osmosis (RO) membranes.

The removal of an endocrine disrupting compound, bisphenol A (BPA), from model solutions by selected nanofiltration (NF) and reverse osmosis (RO) membranes was studied. The commercially available membranes NF 90, NF 270, XLE BWRO, BW 30 (Dow FilmTech), CE BWRO and AD SWRO (GE Osmonics) were used to compare their performances for BPA removal. The water permeability coefficients, rejection of BPA and permeate flux values were calculated for all membranes used. No significant changes in their BPA removal were observed for all tight polyamide based NF and RO membranes tested except for loose NF 270 membrane. The polyamide based membranes exhibited much better performance than cellulose acetate membrane for BPA removal. Almost a complete rejection (≥ 98%) for BPA was obtained with three polyamide based RO membranes (BW 30, XLE BWRO and AD SWRO). But cellulose acetate based CE BWRO membrane offered a low and variable (10-40%) rejection for BPA.

In vivo investigation of calcium phosphate coatings on Ti6-Al-4V alloy substrates using lactic acid - sodium lactate buffered synthetic body fluid.

OBJECTIVE: The aim of this study was to evaluate the mode of failure and biomechanical characteristics of Ti-6Al-4V anchors biomimetically coated with calcium phosphate (CaP) for soft tissue fixation to bone in an animal model. METHODS: The current study included 14 adult New Zealand white rabbits equally divided into two groups. Calcium phosphate-coated Ti-6Al-4V anchors were used in the test group and non-coated Ti-6Al-4V anchors in the control group. A new approach was applied to synthesize the CaP coatings via the biomimetic growth in the Lac-SBF containing Ca(2+) and PO4(3-) ions, Na-lactate and lactic acid (HL). Titanium anchors were implanted into the right tibia, followed by biomechanical tensile strength tests. Histological studies were carried out after removal of anchors (bone-implant surface). RESULTS: The CaP-coated Ti-6Al-4V anchors had significantly higher tensile strength (p=0.003) and displacement values (p=0.004) than the non-coated anchors. Control group scores were higher than those of the test group (14 and 9, respectively) in tensile strength tests. CONCLUSION: The new CaP coating can be used in orthopedic surgery as catalyzer to improve bone ingrowth. We believe that our research will form a model for further research on biomimetic coatings on Ti-6Al-4V substrates.

Effect of temperature on seawater desalination-water quality analyses for desalinated seawater for its use as drinking and irrigation water.

The effect of feed seawater temperature on the quality of product water in a reverse osmosis process was investigated using typical seawater at Urla Bay, Izmir region, Turkey. The tests were carried out at different feed seawater temperatures (11-23 degrees C) using two RO modules with one membrane element each. A number of variables, including pH, conductivity, total dissolved solids, salinity, rejection percentage of a number of ions (Na+, K+, Ca2+, Mg2+, Cl(-), HCO3(-), and SO4(2-)), and the levels of boron and turbidities in collected permeates, were measured. The suitability of these permeates as irrigation and drinking water was checked by comparison with water quality standards.

A new approach in biomimetic synthesis of calcium phosphate coatings using lactic acid-Na lactate buffered body fluid solution.

The main objective of this study was to investigate calcium phosphate (CaP) coatings on Ti6Al4V substrates by using the biomimetic technique. To this purpose, a new solution was developed to coat CaP on Ti6Al4V alloy substrates. The newly formulated body fluid (Lac-SBF) contained appropriate amounts of sodium lactate (NaL) and lactic acid (HL), as well as all the other ionic constituents of the human blood plasma. The inorganic ion concentrations of the Lac-SBF solutions were identical with those of human blood plasma. The new Lac-SBF solution of this study eliminated the need for using Tris/HCl or Hepes/NaOH buffers. Prior to coating, Ti6Al4V substrates were chemically treated in NaOH and/or NaOH+H(2)O(2) solutions as an alternative route and then heated at 600 degrees C for 1h in air. In the previous applications, the Cl(-) ion concentration was found to be higher than blood plasma 103mM, which exists in human blood plasma as a result of Tris/HCl which are used to prevent precipitation and to keep the pH level at certain values. In this study, instead of using Tris/HCl, HL/NaL which are generated by human body and do not show any toxic behavior, are used and Cl(-) concentration was kept at 103mM value for the first time. The prepared Lac-SBF was shown to have similar concentration to human blood plasma in terms of all inorganic ions for the first time. Solution properties were evaluated by using turbidimeter, pH meter and rheometer. The coatings were characterized using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and a scratch tester. The obtained results are presented and discussed.

Separation of fluoride from aqueous solution by electrodialysis: effect of process parameters and other ionic species.

Removal of fluoride from aqueous solution by electrodialysis was studied. Applied voltage, feed flow rate, fluoride concentration in the solution and effect of the other anions as sulfate, chloride were investigated as experimental parameters on fluoride removal from aqueous solution. The separation performance was evaluated in terms of mass transfer and energy consumption. It was obtained that the separation performance increased when the initial concentration of fluoride in the feed solution increased. Percent removal of fluoride increased as the applied potential increased. However, the effect of feed flow rate was not apparent in the range of applied feed flow rate. Separation of fluoride was influenced by chloride but not by sulfate ions.